Problem:
The system was rebooted itself and they can't varyon
a volume group:
varyonvg vgss01page
0516-008 varyonvg: LVM system call returned an unknown
error code (3).
Solution:
lsvg -o -> not variedon
lspv:
hdisk2 000df0af41b969ae vgss01page
hdisk3 000df0af3ca7e15f vgss01page
lquerypv -h /dev/hdisk2 80 10
00000080 000DF0AF 41B969AE 00000000 00000000 |....A.i.........|
lquerypv -h /dev/hdisk3 80 10
00000080 000DF0AF 3CA7E15F 00000000 00000000 |....<.._........|
lqueryvg -Atp hdisk2 and hdisk3 gives the proper information except for
Physical: 000df0afc5256113 1 0 which is not part of the vg
chpv -va hdisk2 -> 0516-010 lqueryvg: Volume group must be varied on;
use varyonvg command.
0516-722 chpv: Unable to change physical volume hdisk2.
chpv -va hdisk3 -> 0516-010 lqueryvg: Volume group must be varied on;
use varyonvg command.
0516-722 chpv: Unable to change physical volume hdisk3.
exportvg vgss01page -> ok
rmdev -dl hdis2 -> ok
rmdev -dl hdisk3 -> ok
cfgmgr -> hanging for a while but completed
importvg -y vgss01page hdisk2 ->
0516-304 getlvodm: Unable to find device id 000df0afc5256113 in the
Device
Configuration Database.
PV Status: hdisk2 000df0af41b969ae PVACTIVE
hdisk3 000df0af3ca7e15f PVACTIVE
000df0afc5256113 NONAME
varyonvg: Volume group vgss01page is varied on.
0516-510 synclvodm: Physical volume not found for physical volume
identifier 000df0afc52561130000000000000000.
0516-548 synclvodm: Partially successful with updating volume
group vgss01page.
vgss01page
PV Status: hdisk2 000df0af41b969ae PVACTIVE
hdisk3 000df0af3ca7e15f PVACTIVE
000df0afc5256113 NONAME
varyonvg: Volume group vgss01page is varied on.
lsvg -l vgss01page
vgss01page:
LV NAME TYPE LPs PPs PVs LV STATE MOUNT
POINT
paging01 paging 271 271 1 closed/syncd N/A
13:39(usehss01:/export/home/root) # uptime
01:41PM up 5:51, 5 users, load average: 0.03, 0.04, 0.05
13:41(usehss01:/export/home/root) #
sysdumpdev -L
0453-039
Device name: /dev/sysdumpnull
Major device number: 7
Minor device number: 2
Size: 0 bytes
Date/Time: Wed Dec 31 19:00:00 EST 1969
Dump status: -1
no dump device defined
# sysdumpdev -l
primary /dev/sysdumpnull
secondary /dev/sysdumpnull
copy directory /var/adm/ras
forced copy flag TRUE
always allow dump TRUE
dump compression OFF
sent customr a technote procedure to create a valid dump device
reducevg -d vgss01page 000df0afc5256113
reducevg -d vgss01page 000df0afc5256113
0516-304 putlvodm: Unable to find device id
000df0afc52561130000000000000000 in the Device
Configuration Database.
0516-896 reducevg: Warning, cannot remove physical volume
000df0afc5256113 from Device Configuration Database.
lsvg -p vgss01page
vgss01page:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE
DISTRIBUTION
hdisk2 active 271 0
00..00..00..00..00
hdisk3 active 542 542
109..108..108..108..109
swapon -a to actvate the paging space
My blog has moved,please visit the new site
IBM AIX/UNIX system storage administration ksh/perl scripting
Saturday, March 28, 2009
0516-008 varyonvg: LVM system call returned an unknown error code (3).
Subscribe to:
Post Comments (Atom)
Labels
- ACL (1)
- admin (2)
- AIX 5.3 (1)
- AIX 6.1 (3)
- Atape (1)
- backup (5)
- backupios (1)
- Best Practices (1)
- bosboot (1)
- cdrom (1)
- cfgmgr (1)
- commands (4)
- compatibility (1)
- console (1)
- device (2)
- dhcp (1)
- disk (1)
- DNS (2)
- Downloads (1)
- dump (1)
- Dynamic (1)
- error (1)
- errpt (1)
- ESS (1)
- etherchannel (1)
- Filesystem (7)
- firmware (2)
- Freeware (1)
- ftp (2)
- getty (1)
- GNU (1)
- HACMP (2)
- HEA (1)
- HMC (2)
- hostname (1)
- I/O (1)
- Installation (2)
- installp (2)
- IP alias (1)
- iptrace (1)
- iso (2)
- IVM.CLI (1)
- jfs (1)
- JFS to JFS2 conversion (1)
- jfs2 (2)
- kdb (1)
- kernel (1)
- LED (2)
- lifecycle (2)
- Live Partition Mobility (1)
- lofiadm (1)
- login (1)
- LPAR (1)
- lppchk (1)
- lsof (1)
- LV (1)
- lvm (3)
- memory (1)
- migration (4)
- mksysb (2)
- mkvdev (1)
- mkvgdata (1)
- mount (1)
- multibos (1)
- ndd (2)
- netstat (1)
- network (7)
- NFS (2)
- NIC (4)
- NIM (2)
- NPIV (1)
- ODM (2)
- openssh (1)
- oslevel (1)
- patching (1)
- Performance (4)
- Perl (2)
- Perl Module (2)
- permission (1)
- port (1)
- Power VM (1)
- Power5 (1)
- Power6 (1)
- printer (1)
- problem (17)
- process (4)
- RAID5 (1)
- Recovery (2)
- respawn (1)
- restore (1)
- routing (4)
- RSC (1)
- runq (1)
- savevg (1)
- scripts (4)
- SEA (1)
- security (5)
- sendmail (1)
- solaris (7)
- SSA (1)
- SSH (2)
- ssh-agent (1)
- storage (3)
- subnet (1)
- Sun Remote System Control (1)
- support (2)
- synchronize (1)
- TCPIP (5)
- telnet (2)
- time zone (1)
- topas (1)
- Total Storage (1)
- trace (2)
- tuning (1)
- uninstall (1)
- update (1)
- update boot (4)
- upgrade (3)
- users (2)
- Veritas Volume Manager (1)
- VG (1)
- VIOS (4)
- VMM (1)
- VxVM (1)
- wtmp (1)
Blog Archive
-
▼
2009
(65)
-
▼
March
(42)
- Getty and Login relationship in AIX
- How can I move my DVD-ROM or CD-ROM drive from one...
- Hard-Luck Editing the /etc/inittab File in Mainten...
- Querying filesystem information used in mouting a ...
- 0516-008 varyonvg: LVM system call returned an unk...
- Remove IP Configuration for enX Device
- Procedure to change NIC speed
- Cfgmgr does not find a device
- lsdev: 0514-521 Cannot find information in the pre...
- Use IP alias trick to solve hung NFS mount problem
- HMC CLI to Turn Off Attention LED on System p Servers
- Raw vs. JFS Logical Volumes I/O
- How can I suppress the telnet login message (hostn...
- Using netstat and rmsock to Identify Processes Usi...
- How to install Perl module on AIX
- List installed Perl modules
- p5 System Firmware Upgrade
- Problem: 0315-132 The supplied error log is not va...
- Total Storage Network setup using the serial port
- Procedure to remove and rediscover ESS disk's
- Adding New telnet Service to Different Port
- AIX using chdev to add/change/remove routing
- Why you should NOT put two interfaces in same subnet
- Migrate print queues from one AIX server to the other
- How to do a iptrace
- How to mount ISO image file on AIX
- Solaris script(get_active_nic_settings.sh) - bash...
- Solaris script (get_all_nic_settings.sh) - bash sc...
- lppchk -v returns some filesets in inconsistent state
- Sun Remote System Control - Using the RSC Command ...
- oslevel -s reports incorrectly after OS migration ...
- Script to list process in current runq in AIX
- JFS to JFS2 conversion for rootvg
- Mulitbos
- NIM server setup for dummies
- 3004-622 An error occurred updating the password d...
- HACMP Version Compatibility Matrix
- Preparing to migrate to AIX 5.2, 5.3, or 6.x
- Migrating Users from One AIX System to Another AIX...
- Restore specific file from mksysb backup
- List files in mksysb backup
- 3001-243 The DBM files for /etc/passwd are out of...
-
▼
March
(42)
No comments:
Post a Comment